Basic Info.
Model NO.
YA2 series High Voltage Three-phase Increase-safet
Function
Driving, Control
Starting Mode
Direct on-line Starting
Certification
ISO9001, CCC
Transport Package
Carton/Wooden Case/Wooden Crate
Specification
0.75kw to 375kw
Product Description
YA2 series High Voltage Three-phase Increase-safety Asynchronous Motors
1.Summary YA2 series High Voltage Three-phase Increase-safety Asynchronous Motors are the new series products designed and manufactured by our company based on the advanced technologies at home and abroad with integration of our actual experience on producing the high voltage flame proof three-phase asynchronous motors. The motor is made of cast iron as the base, which is of compact structure, higher protection level, and easy to be installed and maintained. Additionally, the motors are granted all advantages, such as high efficiency and energy saving, reliable performance, low noise, small vibration, long service life and others through further optimized design and elaborate manufacturing process. The series motors are suitable for driving all kinds of fans, compressors, water pump, machine tools, transport machines and other general mechanical equipments, and are used for the industry of mine, steel works, mechanism, petroleum, chemical products, power station and others as the prime mover. The explosion-proof performance of the series motors meets GB3836.1-2000 "Part 1: General requirements of electrical apparatus for explosive gas atmospheres" and the stipulations of GB3836.3-2000 "Part 3: Increase-safety type 'e' of electrical apparatus for explosive gas atmospheres". The motors are made to be with the explosion-proof type according to all of these requirements and stipulations. The explosion-proof level of which is Exe II BT1, Exe II BT2, Exe II BT3. Which are mainly used for the sites where are available the mixed explosive gas.
2.Structure and installation method The shell of the standard motor is of IP54 for the protection level, which can be IP54 or more on the request of users. The installation method of standard motor is IMB3, but other installation methods are available too. The motor can be cooled as per the description of IC411.
3.Working conditions Rating voltage: 6000V or 10000V, the allowable tolerance is ±5%. Rating frequency: 50Hz, the allowable tolerance is ±2%. Ambient Temperature of Air: -15ºC~40ºC Elevation: less than 1000m. Working Type: S1 continuous working system Transmission method: transmitted by couplings. The special requirement for the application condition should be specified additionally when ordering.
4.Main features Compact structure, small volume and light weight. It can be used to substitute the conventional closed cooling motor. Higher running efficiency and reliability, it is the new generation of energy saving and environmental protection product. The higher grades of cast irons are applied for the base of machine and the terminal cover, which makes the whole product a good strength and rigidity available. Optimized design of structure and appearance, and the details about the mechanical strength and ventilation has been considered completely, which makes the motor more reliable. For instance, the heat loss bar structure at the inside and outside of the machine base and terminal cover can improve the mechanical strength, heat loss performance and the whole appearance simultaneously. H500-2 type and H560-2 type motors use the end-covering type spherical sliding bearings, which can provide an enforced lubrication; whereas the rest motors use the rolling bearings, and nonstop oil-feeding and discharging device is designed. The fan housing of motor is made of glass fiber reinforced plastic, it is of higher performance to against impact, and has good sound reduction effect. If the fan housing is of a streamline design, which can reduce over 5dB noise of motor. The terminal box of power is designed over the side top of motor, which makes the wiring method flexible. And 4 places are designed for outgoing wirings with a changeable degree of 30°. The motor uses F-grade insulation, the stator winding is painted by using VPI vacuum pressure, which provides a higher electric strength and mechanical strength, good corrosion stability and moisture resistivity. The coil and iron core is processed by a special anticorona, which makes the motor available to be running at the places where has a higher elevation. The motor uses cast aluminum rotors or copper rotors, the rotors guiding bar, end ring and fan blade is fabricated simultaneously, which makes it a good reliability. The motors can be used under a worse environment. Additionally, the moment of inertia has been increase for the allowable load. According to the requirements of users, the motors can design and install a special device to monitor the temperature of the stator winding, bearings and other main components, additionally, the dump-proof device, heating device and other real-time monitoring devices can also be designed.
5.Notice for ordering When ordering our products, please specify extra the model, rating power, synchronous speed, rating voltage, frequency, explosion-proof classification, rotation direction, installation method, protection classification and the outgoing direction of wiring and others of the motor you desire. Any special requirements can be met well after the both parties make a negotiation, and then the required special motors can be supplied accordingly (such as the different rating voltage, rating frequency, installation size, noise requirement, environmental condition and others). The motors that are used to drive the blower, coal grinding machine, rolling mill, windlass and the motors that are driven by belt pulley will be accompanying with the relevant technical information when ordering, which is mainly for a purpose to guarantee the motor to be running reliably. Meanwhile, the technical agreement will be required to sign by both parties. The technical data contained in the specimen is subject to change without notice since the technology of products is being progressed and the relevant standard at home and abroad is revised. |
A: 30% T/T in advance, 70% before shipment, L/C at sight, Western Union or Paypel
Q: What is your delivery time?
A: Within 25-30 days after receiving deposit.
Q: Do you offer OEM service?
A: Yes. We accept OEM service.
Q: What is your MOQ of this item ?
A: 5 PCS per item.
Q: Can we type our brand on it?
A: Yes of course.
Q: Where is your loading port ?
A: FUZHOU Port, XIAMENPort, China.
Q: What is your production capacity?
A: About 500 PCS per day.
Address:
2#Plant, F Section, East 104 Road, North Gantan, Fuan, Ningde, Fujian, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components
Company Introduction:
FUAN XINRUI MACHINERY Co., Ltd., founded in 2010, is a high efficiency motor manufacturer which combines researching, producing and marketing. After 6 years of development, the total area has reached 80, 000 square meters; And the total number of staff reaches more than 400 persons. Company continues to explore innovation, takes variety of advantages, and seizes every opportunity to increase marketing for many countries and areas which including Italy, Germany, UK, Belgium, Russia, Egypt, Iran, Thailand, and Malaysia, and the yearly turnover has exceeded 30 million US dollars. At present, the company has obtained the certificates including ISO 9001: 2008, ISO 14001: 2004, CCC, CE, and so on. Among our products, the IE2, IE3 high efficiency motor has been widely recognized by our overseas customers. By the high-end customer driven the entire product brand and quality improvement, company forms a strong competitiveness in the same industry, and also plays a leading role for the entire industry upstream and downstream chain upgrading. Nowadays, with great enthusiasm and persistence efforts, we are working toward a stable quality and good service oriented enterprise for customer benefits. We are expecting your kind attention, thank you.