Introduction:
Y series motor is totally enclosed self fan cooled squirrel cage three-phase asynchronous motor, which is the basic series of the latest design. In accordance with the relevant provisions of the IEC standard. With high efficiency, energy saving, high starting torque, low noise, small vibration, high reliability, easy to use and convenient maintenance and so on. The general situation is widely used in inflammable, explosive or corrosive gas, and no special requirements to the mechanical equipment, such as metal cutting machines, pumps, fans, mixer, agricultural machinery, transport machinery and food machinery etc..
Operating conditions:
Ambient temperature:-15ºC<θ<40ºC
Altitude: not exceed 1000m
Rated voltage:380V or any voltage between 220V-760V
Rated frequency: 50Hz,60Hz
Protection class:IP44,IP54,IP55
Insulation class: B,F
Cooling method: IC0141
Duty:S1(continuous)
Connection: Star-connection for up to 3kW,
Delta-connection for 4kW and above.
Technical date
| Model | Rated Output | Full Load | | | |
| KW | HP | Speed
(r.p.m) | Current
(A) | Eff
(%) | Power factor
(cosθ) | Ist/In | Tst/Tn | |
| 380V 50Hz synchronous Speed 3000r/min(2 poles) |
| Y-801-2 | 0.75 | 1 | 2830 | 1.81 | 75 | 0.84 | 6.5 | 2.2 | 2.3 |
| Y-802-2 | 1.1 | 1.5 | 2830 | 2.52 | 77 | 0.86 | 7.0 | 2.2 | 2.3 |
| Y-90S-2 | 1.5 | 2 | 2840 | 3.44 | 78 | 0.85 | 7.0 | 2.2 | 2.3 |
| Y-90L-2 | 2.2 | 3 | 2840 | 4.83 | 80.5 | 0.86 | 7.0 | 2.2 | 2.3 |
| Y-100L-2 | 3 | 4 | 2870 | 6.39 | 82 | 0.87 | 7.0 | 2.2 | 2.3 |
| Y-112M-2 | 4 | 5.5 | 2890 | 8.17 | 85.5 | 0.88 | 7.0 | 2.2 | 2.3 |
| Y-132S1-2 | 5.5 | 7.5 | 2900 | 11.1 | 85.5 | 0.88 | 7.0 | 2.0 | 2.3 |
| Y-132S2-2 | 7.5 | 10 | 2900 | 15.0 | 86.2 | 0.88 | 7.0 | 2.0 | 2.3 |
| Y-160M1-2 | 11 | 15 | 2930 | 21.8 | 87.2 | 0.88 | 7.0 | 2.0 | 2.3 |
| Y-160M2-2 | 15 | 20 | 2930 | 29.4 | 88.2 | 0.89 | 7.0 | 2.0 | 2.3 |
| Y-160L-2 | 18.5 | 25 | 2930 | 35.5 | 89 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-180M-2 | 22 | 30 | 2940 | 42.2 | 89 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-200L1-2 | 30 | 40 | 2950 | 56.9 | 90 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-200L2-2 | 37 | 50 | 2950 | 69.8 | 90.5 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-225M-2 | 45 | 60 | 2970 | 83.9 | 91.5 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-250M-2 | 55 | 75 | 2970 | 103 | 91.5 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-280S-2 | 75 | 100 | 2970 | 139 | 92 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-280M-2 | 90 | 125 | 2970 | 166 | 92.5 | 0.89 | 7.0 | 2.0 | 2.2 |
| Y-315S-2 | 110 | 150 | 2980 | 203 | 92.5 | 0.89 | 6.8 | 1.8 | 2.2 |
| Y-315M-2 | 132 | 180 | 2980 | 242 | 93 | 0.89 | 6.8 | 1.8 | 2.2 |
| Y-315L1-2 | 160 | 220 | 2980 | 292 | 93.5 | 0.89 | 6.8 | 1.8 | 2.2 |
| Y-315L2-2 | 200 | 270 | 2980 | 365 | 93.5 | 0.89 | 6.8 | 1.8 | 2.2 |
| 380V 50Hz synchronous Speed 1500r/min(4 poles) |
| Y-801-4 | 0.55 | 0.75 | 1390 | 1.51 | 73 | 0.76 | 6.0 | 2.4 | 2.3 |
| Y-802-4 | 0.75 | 1 | 1390 | 2.01 | 74.5 | 0.76 | 6.0 | 2.3 | 2.3 |
| Y-90S-4 | 1.1 | 1.5 | 1400 | 2.75 | 78 | 0.78 | 6.5 | 2.3 | 2.3 |
| Y-90L-4 | 1.5 | 2 | 1400 | 3.65 | 79 | 0.79 | 6.5 | 2.3 | 2.3 |
| Y-100L1-4 | 2.2 | 3 | 1430 | 5.03 | 81 | 0.82 | 7.0 | 2.2 | 2.3 |
| Y-100L2-4 | 3 | 4 | 1430 | 6.82 | 82.5 | 0.81 | 7.0 | 2.2 | 2.3 |
| Y-112M-4 | 4 | 5.5 | 1440 | 8.77 | 84.5 | 0.82 | 7.0 | 2.2 | 2.3 |
| Y-132S-4 | 5.5 | 7.5 | 1440 | 11.6 | 85.5 | 0.84 | 7.0 | 2.2 | 2.3 |
| Y-132M-4 | 7.5 | 10 | 1440 | 15.4 | 87 | 0.85 | 7.0 | 2.2 | 2.3 |
| Y-160M-4 | 22 | 15 | 1460 | 22.6 | 88 | 0.84 | 7.0 | 2.2 | 2.3 |
| Y-160L-4 | 15 | 20 | 1460 | 30.3 | 88.5 | 0.85 | 7.0 | 2.2 | 2.3 |
| Y-180M-4 | 18.5 | 25 | 1470 | 35.9 | 91 | 0.86 | 7.0 | 2.0 | 2.2 |
| Y-180L-4 | 22 | 30 | 1470 | 42.5 | 91.5 | 0.86 | 7.0 | 2.0 | 2.2 |
| Y-200L-4 | 30 | 40 | 1470 | 56.8 | 92.2 | 0.87 | 7.0 | 2.0 | 2.2 |
| Y-225S-4 | 37 | 50 | 1480 | 70.4 | 91.8 | 0.87 | 7.0 | 1.9 | 2.2 |
| Y-225M-4 | 45 | 60 | 1480 | 84.2 | 92.3 | 0.88 | 7.0 | 1.9 | 2.2 |
| Y-250M-4 | 55 | 75 | 1480 | 103 | 92.6 | 0.88 | 7.0 | 2.0 | 2.2 |
| Y-280S-4 | 75 | 100 | 1480 | 140 | 92.7 | 0.88 | 7.0 | 1.9 | 2.2 |
| Y-280M-4 | 90 | 125 | 1480 | 164 | 93.5 | 0.89 | 6.8 | 1.9 | 2.2 |
| Y-315S-4 | 110 | 150 | 1480 | 201 | 93.5 | 0.89 | 6.8 | 1.9 | 2.2 |
| Y-315M-4 | 132 | 180 | 1490 | 240 | 94 | 0.89 | 6.8 | 1.9 | 2.2 |
| Y-315L1-4 | 160 | 220 | 1490 | 289 | 94.5 | 0.89 | 6.8 | 1.9 | 2.2 |
| Y-315L2-4 | 200 | 270 | 1490 | 361 | 94.5 | 0.89 | 6.8 | 1.9 | 2.2 |
| 380V 50Hz synchronous Speed1000r/min(6Poles) |
| Y-90S-6 | 0.75 | 1 | 910 | 2.25 | 72.5 | 0.70 | 5.5 | 2.0 | 2.2 |
| Y-90l-6 | 1.1 | 1.5 | 910 | 3.16 | 73.5 | 0.72 | 5.5 | 2.0 | 2.2 |
| Y-100L-6 | 1.5 | 2 | 940 | 3.97 | 77.5 | 0.74 | 6.0 | 2.0 | 2.2 |
| Y-112M-6 | 2.2 | 3 | 940 | 5.16 | 80.5 | 0.74 | 6.0 | 2.0 | 2.2 |
| Y-132S-6 | 3.0 | 4 | 960 | 7.23 | 83 | 0.76 | 6.5 | 2.0 | 2.2 |
| Y-132M1-6 | 4.0 | 5.5 | 960 | 9.40 | 84 | 0.77 | 6.5 | 2.0 | 2.2 |
| Y-132M2-6 | 5.5 | 7.5 | 960 | 12.6 | 85.3 | 0.78 | 6.5 | 2.0 | 2.2 |
| Y-160M-6 | 7.5 | 10 | 970 | 17.0 | 86 | 0.78 | 6.5 | 2.0 | 2.0 |
| Y-160L-6 | 11.0 | 15 | 970 | 24.6 | 87 | 0.78 | 6.5 | 2.0 | 2.0 |
| Y-180L-6 | 15.0 | 20 | 970 | 31.4 | 89.5 | 0.81 | 6.5 | 1.8 | 2.0 |
| Y-200L1-6 | 18.5 | 25 | 970 | 37.7 | 89.8 | 0.83 | 6.5 | 1.8 | 2.0 |
| Y-200L2-6 | 22.0 | 30 | 970 | 44.6 | 90.2 | 0.83 | 6.5 | 1.8 | 2.0 |
| Y-225M-6 | 30.0 | 40 | 980 | 59.5 | 90.2 | 0.85 | 6.5 | 1.7 | 2.0 |
| Y-250M-6 | 37.0 | 50 | 980 | 72.0 | 90.8 | 0.86 | 6.5 | 1.8 | 2.0 |
| Y-280S-6 | 45.0 | 60 | 980 | 85.4 | 92 | 0.87 | 6.5 | 1.8 | 2.0 |
| Y-280M-6 | 55 | 75 | 980 | 104 | 92 | 0.87 | 6.5 | 1.8 | 2.0 |
| Y-315S-6 | 75 | 100 | 990 | 141 | 92.8 | 0.87 | 6.5 | 1.8 | 2.0 |
| Y-315M-6 | 90 | 125 | 990 | 169 | 93.2 | 0.87 | 6.5 | 1.8 | 2.0 |
| Y-315L-6 | 110 | 150 | 990 | 206 | 93.5 | 0.87 | 6.5 | 1.8 | 2.0 |
| Y-315L2-6 | 132 | 180 | 990 | 246 | 93.8 | 0.87 | 6.5 | 1.8 | 2.0 |
| 380V 50Hz synchronous Speed 750r/min(8Poles) |
| Y-132S-8 | 2.2 | 3 | 710 | 5.85 | 80.5 | 0.71 | 5.5 | 2.0 | 2.0 |
| Y-132M-8 | 3.0 | 4 | 710 | 7.72 | 82 | 0.72 | 5.5 | 2.0 | 2.0 |
| Y-160M1-8 | 4.0 | 5.5 | 720 | 9.91 | 84 | 0.73 | 6.0 | 2.0 | 2.0 |
| Y-160M2-8 | 5.5 | 7.5 | 720 | 13.3 | 85 | 0.74 | 6.0 | 2.0 | 2.0 |
| Y-160L-8 | 7.5 | 10 | 720 | 17.7 | 86 | 0.75 | 5.5 | 2.0 | 2.0 |
| Y-180L-8 | 11.0 | 15 | 730 | 24.8 | 87.5 | 0.77 | 6.0 | 2.0 | 2.0 |
| Y-200L-8 | 15.0 | 20 | 730 | 34.1 | 88 | 0.76 | 6.0 | 2.0 | 2.0 |
| Y-225S-8 | 18.5 | 25 | 730 | 41.3 | 89.5 | 0.76 | 6.0 | 1.7 | 2.0 |
| Y-225M-8 | 22.0 | 30 | 730 | 47.6 | 90 | 0.78 | 6.0 | 1.8 | 2.0 |
| Y-250M-8 | 30.0 | 40 | 740 | 63.0 | 90.5 | 0.80 | 6.0 | 1.8 | 2.0 |
| Y-280S-8 | 37.0 | 50 | 740 | 78.2 | 91 | 0.79 | 6.0 | 1.8 | 2.0 |
| Y-280M-8 | 45.0 | 60 | 740 | 93.2 | 91.7 | 0.80 | 6.0 | 1.8 | 2.0 |
| Y-315S-8 | 55.0 | 75 | 740 | 114 | 92 | 0.80 | 6.0 | 1.6 | 2.0 |
| Y-315M-8 | 75.0 | 100 | 740 | 152 | 92.5 | 0.81 | 6.5 | 1.6 | 2.0 |
| Y-315L1-8 | 90.0 | 125 | 740 | 179 | 93 | 0.82 | 6.5 | 1.6 | 2.0 |
| Y-315L2-8 | 110.0 | 150 | 740 | 218 | 93.3 | 0.82 | 6.3 | 1.6 | 2.0 |
| 380V 50Hz synchronous Speed 600r/min(10Poles) |
| Y315S-10 | 45 | 60 | 590 | 101 | 91.5 | 0.74 | 6.0 | 1.4 | 2.0 |
| Y-315M-10 | 55 | 75 | 590 | 123 | 92 | 0.74 | 6.0 | 1.4 | 2.0 |
| Y-315L2-10 | 75 | 100 | 590 | 164 | 92.5 | 0.75 | 6.0 | 1.4 | 2.0 |
The Production Process
Some basic component are made by ourselves, It will help us to maintain the cost and quality.
Company Information
XINRUI MACHINERY is specialized in manufacturing and exporting a wide range of electromechanical products, covering Electric Motor,Rolling Door Motor, BLDC Motor, Water pump, Alternators, Generators, etc. Now Our new energy automobile motor has been completed the small batch production. It will be mass production in next year. And our company Group "DAYOU TECH"will become listedon China soon.
Office and R&D Center
Certification
Good customer relationship
Visit customers regularly, understand customer quality requirements, maintain the good relationship with customers.
FAQ
Q: Do you offer OEM service?
A: Yes
Q: What is your payment term?
A: 30% T/T in advance, 70% balance when receiving B/L copy.Or irrevocable L/C.
Q: What is your lead time?
A: About 30 days after receiving deposit or original L/C.
Q: What certificates do you have?
A: We have CE, ISO. And we can apply for specific certificate for different country such as SONCAP for Nigeria, COI for Iran, SASO for Saudi Arabia, etc
What we do:
Stamping of laminationRotor die-castingWinding and inserting - both manual and semi-automaticallyVacuum varnishingMachining shaft, housing, end shields, etcRotor balancingPainting - both wet paint and powder coatingAssemblyPackingInspecting spare parts every processing100% test after each process and final test before packing.
Sample:
According to your design,sample will be offer!!
Advantage:
Low MOQ: It can meet your promotional business very well. Good Service : We will give professional and efficient service.Good Quality :We have strict quality control system.Fast Delivery: We can offer railway transportation if have urgent request.Warranty & After-sales Service: 1 years, we will give perfect after-sales service.
